Crestron TMK-4L Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Rak dan Dudukan Crestron TMK-4L. Crestron TMK-4L 16 halaman. Trim ring mount kits
Juga untuk Crestron TMK-4L: Panduan Instalasi (12 halaman)

Halaman Cetak

Crestron TMK-4L & WMKT-4L

Installation Guide – DOC. 6390A

Insert Trim Ring into Opening

NOTE: The required PMK-4L or BB-4L is not shown.

3. When the trim ring is in position, bend the top two flanges of the ring

upward and the bottom two flanges downward.

•

If mounting into the PMK-4L, bend the flanges approximately 90

degrees.

•

If mounting into the BB-4L, bend the flanges back as far as they can

go.

4. Run the necessary cables for the touchpanel and secure them behind the

drywall.

5. The TPS-4L can be installed using the four tapped holes in the PMK-4L or

BB-4L. Refer to the latest revision of the TPS-4L Operations and

Installation Guide (Doc. 6449) for details. Refer also to the comprehensive

illustration on the following page.

Trim Ring Mount Kits

IMPORTANT

MAKE DRYWALL CUTOUT AS LEVEL AS

POSSIBLE. MOUNTING PLATE ALLOWS

ONLY MINOR ADJUSTMENT OF THE

TOUCHPANEL.

TRIM RING (2013241)

Trim Ring Mount Kits: TMK-4L & WMKT-4L • 5