Sharp CD-BA250H Panduan Pengoperasian - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-BA250H. Sharp CD-BA250H 42 halaman. Mini component system
Juga untuk Sharp CD-BA250H: Panduan Pengoperasian (5 halaman), Panduan Cepat (4 halaman)
Halaman Cetak
„ To automatically play the traffic informa-
tion (EON-TI)
When the traffic information is broadcast, the radio will switch to it automatically.
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.
z "PTY TI" and "SELECT" will appear alternately for about 6 seconds.
z If the EON button is pressed when "EON" is not displayed, "NO EON" will ap-
pear for 5 seconds to indicate that the unit cannot enter the EON stand-by
mode.
3
Whilst they are displayed, select the TI (Traffic Information) by
pressing the
PRESET
4
Within 4 seconds, press the PTY.TI SEARCH button.
z "TI" and "WAITING" will appear for 2 seconds each.
z "TI" will appear, and the unit will enter the EON-TI stand-by mode.
or
PRESET
button.
5
When a TA specified starts on an ON (other network) station, the
unit will automatically switch to that station, and "TI" will flash.
6
When the traffic information is over, the unit will automatically re-
turn to the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("TI"
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("TI" will go out.)
"WAITING")
ENGLISH
E-23