Sharp CD-BH20 Panduan Pengoperasian - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-BH20. Sharp CD-BH20 21 halaman.
Halaman Cetak
- 1. Special Notes
- 2. Consumer Limited Warranty
- 3. Controls and Indicators
- 4. System Connection
- 5. Remote Control
- 6. General Control
- 7. Setting the Clock (Remote Control Only)
- 8. Listening to Bluetooth Enabled Devices
- 9. Listening to a CD or MP3 Disc
- 10. Listening to USB Mass Storage Device/Mp3 Player
- 11. Listening to the Radio
- 12. Timer and Sleep Operation (Remote Control Only)
- 13. Enhancing Your System
- 14. Troubleshooting Chart
- 15. Maintenance
- 16. Specifications
System connection
Make sure to unplug the AC power cord before making any connections.
Installing the AM loop antenna
< Assembling >
< Attaching to the wall >
wall
Screws (not supplied)
AC outlet
(AC 100 - 240 V ~
50/60 Hz)
■ Line In connection
Connect to the TV using an audio cable.
TV
(commercially
Main unit
To select Line In function:
● On main unit: Press INPUT button repeatedly until Line
In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
AM loop antenna
To audio output
jacks
Audio cable
available)
To LINE input
jacks
Installing the supplied
FM antenna
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
■ Antenna connection
Supplied FM antenna:
Connect to the FM 75 ohms jack and position it where
reception is best.
External FM antenna:
Use an external FM antenna (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM antenna wire
before use.
Supplied AM loop antenna:
Connect to the AM terminal and position it where reception
is best. Place it on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
■ Bluetooth standby mode
● The first time the unit is plugged in, it will enter the
Bluetooth standby mode. "Bluetooth Stby" appears on
the display.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
● To return to the Bluetooth standby mode, press the ECO
button again.
■ AC power connection
After all connections have been made correctly, plug the
AC power cord into the AC outlet.
Note:
Unplug the AC power cord from the AC outlet if the unit will
not be in use for a prolonged period of time.
E-6
External FM antenna
for better reception (not
supplied)