Sharp CD-E250E Panduan Pengoperasian - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-E250E. Sharp CD-E250E 32 halaman. Mini component system
Juga untuk Sharp CD-E250E: Panduan Pengoperasian (32 halaman)

Halaman Cetak
Sharp CD-E250E Panduan Pengoperasian
To perform programmed recording:
1 Programme discs and tracks. (See page 18.)
2 Press the REC PAUSE (TAPE-2
) button.
3 Press the
/
button.
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
! Recording is paused, but CD playback will continue.
To resume recording, press the
/
button.
To stop recording:
Press the
button.
The CD and tape will stop.
Note:
Whilst recording, OPEN/CLOSE
button is deactivated. It is recom-
mended to perform CD recording after closing the disc tray.

" Recording from the radio

1
Tune in to the desired station. (See page 19.)
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the
/
button to start recording.
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the
/
button.
To stop recording:
Press the
button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
2) button until "TAPE 1" appears on
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the
/
button to start dubbing.
To stop dubbing:
Press the
button.
TAPE 1 and TAPE 2 will simultaneously stop.

" Erasing recorded tapes

1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1
2) button until "TAPE 2" appears on the dis-
play.
3 Press the REC PAUSE (TAPE-2
) button.
4 Press the
/
button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
03/2/17
CD-E250E(E)3.fm
CD-E250E
23