Sharp CD-G100000 Panduan Pengoperasian - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-G100000. Sharp CD-G100000 47 halaman. Mini component system

Halaman Cetak

Setting the clock

In this example, the clock is set for the 12-hour (AM 12:00) display.

Press the ON/STAND-BY button to turn the power on.

Press the CLOCK/TIMER button.

Within 10 seconds, press the

lect "CLOCK", and press the MEMORY/SET button.

Press the

button to select 12-hour or 24-

hour display and then press the MEMORY/SET button.

"AM 12:00"

The 12-hour display will appear.

(AM 12:00 - PM 11:59)

"AM 0:00"

The 12-hour display will appear.

(AM 0:00 - PM 11:59)

"0:00"

The 24-hour display will appear.

(0:00 - 23:59)

Press the

then press the MEMORY/SET button.

Press the

1 hour. Hold it down to advance continuously.

Press the

then press the MEMORY/SET button.

Press the

1 minute. Hold it down to change the time in 5-minute intervals.

To confirm the time display:

[When the unit is in the stand-by mode]

button to se-

Press the CLOCK/TIMER button.

The time display will appear for about 10 seconds.

[When the power is on]

Press the CLOCK/TIMER button.

Within 10 seconds, press the

The time display will appear for about 10 seconds.

Note:

The "CLOCK" will appear or time will flash to confirm the time dis-

play when the AC power supply is restored after a power failure or

unplugging the unit. If incorrect, readjust the clock as follows.

To readjust the clock:

Perform "Setting the clock" from step 1. If the "CLOCK" does not

appear in step 3, step 4 (for selecting the 12-hour or 24-hour dis-

play) will be skipped.

To change the 12-hour or 24-hour display:

1 Clear all the programmed contents. [Refer to "Clearing all the

memory (reset)" on page 43 for details.]

2 Perform "Setting the clock" from step 1.

Note:

The clock can also be set with the remote control.

button to adjust the hour and

button once to advance the time by

button to adjust the minutes and

button once to advance the time by

button to display the time.

CD-G10000

CP-G10000S