Sharp CD-G15000 Panduan Pengoperasian - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-G15000. Sharp CD-G15000 48 halaman. Speaker system
Juga untuk Sharp CD-G15000: Panduan Memulai Cepat (2 halaman)
Timer and sleep operation
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc, tuner,
tape) at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer:
Once timer play and once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a
radio station.
Daily timer:
Daily timer play and daily timer recording works at
the same preset time everyday.
For example, set the timer as a wake up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1 Set the daily timer (pages 37 - 39).
2 Set the once timer (pages 37 - 39).
1 minute or more
Daily timer
Start
Stop
Note:
When the setting times for the daily timer and once timer overlap,
the once timer takes priority. Allow an interval of at least 1 minute
between operations.
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 19).
2 For timer playback: Load a cassette or discs to be played.
1
2
3
Once timer
Start
Stop
Timer playback or timer recording
If it is not set, you cannot use the timer function.
For timer recording: Load a cassette for recording in the TAPE
2 cassette compartment.
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
CD-G15000
CP-G15000
or
button to select
Continued to the next page
37