Sharp CD-RW5000 Panduan Pengoperasian - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp CD-RW5000. Sharp CD-RW5000 48 halaman. Audio tower system
Juga untuk Sharp CD-RW5000: Panduan Cepat (8 halaman)

Halaman Cetak

Press the 06

06 button to start playback.

Playback will begin from track 1 on

After that disc finishes playing, the next disc will automatically play.

When there is no CD in one of the disc tray 1 - 6 positions, that position will

be skipped and the next CD will be played.

When the last track on the DISC 6 has finished playing, the CD player will

stop automatically.

To interrupt playback:

Press the 06 button.

To resume playback from the same point, press the 06 button again.

To stop playback:

Press the

button.

To exchange other CDs while playing a disc:

Press the CD tray eject button for the stopped disc and exchange discs.

To remove the CDs:

While in the stop mode, press the desired CD tray eject button.

While playing a disc, you can change other discs.

After use:

Press the POWER button to enter the power stand-by mode.

Caution:

Do not place two CDs in one disc tray.

Do not push the disc tray while it is moving.

If the power fails while the tray is open, wait until the power is restored.

If the disc tray is stopped forcibly, "E-CD20" will appear in the display and the unit

will not function.

If this occurs, press the POWER button to enter the power stand-by mode and then

turn the power on again.

If TV or radio interference occurs during CD operation, move the unit away from the

TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.

*RW5000_P18_24(Playback)

the DISC

Advanced CD Playback

To locate the beginning of a track

To move to the beginning of the next track:

Slightly turn the jog dial clockwise during playback.

You can also skip to the desired track by turning the jog dial.

To restart the track being played:

Slightly turn the jog dial counterclockwise during playback.

You can also skip to the desired track by turning the jog dial.

Notes:

You can locate the beginning of a track on a single disc only.

The 5 or 4 button on the remote control allows you to locate the beginning of a

track.

To locate the desired portion

For audible fast forward:

Press and hold down the 2 button during playback.

For audible fast reverse:

Press and hold down the 3 button during playback.

Notes:

Normal playback will resume when the 3 or 2 button is released.

When the end of the last track is reached during fast forward, "DISC END" will

appear in the display and CD operation will be paused. When the beginning of the

first track is reached during fast reverse, the unit will enter the playback mode.

You can locate the desired portion on a single disc only.

00.7.13, 3:14 PM