Sharp XL-S10 Panduan Pengoperasian - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp XL-S10. Sharp XL-S10 31 halaman. Sharp deck operation manual xl-s10
Juga untuk Sharp XL-S10: Panduan Servis (44 halaman)
Halaman Cetak
Listening to the memorized station
" Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Listening to the radio" on page 18.
2
Press
the
MEMORY/SET
(MEMORY) button to enter the
preset tuning saving mode.
3
Within 5 seconds, press the
PRESET (
or
) button to se-
lect the preset channel num-
ber.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press the
MEMORY/SET
(MEMORY)
button to store that station in
memory.
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorized will be erased.
Note:
The backup function protects the memorized stations for a few
hours should there be a power failure or the AC power cord get dis-
connected.
" To recall a memorized station
Press the PRESET (
or
) button for less than 0.5 seconds to
select the desired station.
Preset channel
" To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1
Press the PRESET (
or
onds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET (
or
station is located.
" To clear a memorized station
1 Recall the memorized station.
2 While it is displayed, press the MEMO-
RY/SET (MEMORY) button.
3 Within 5 seconds, press the CLEAR but-
ton on the remote control.
Frequency and frequency band
) button for more than 0.5 sec-
) button again when the desired
XL-S10
19