Sharp XL-UH05H Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem stereo Sharp XL-UH05H. Sharp XL-UH05H 17 halaman. Micro component system

Halaman Cetak

Troubleshooting chart (continued)

USB

■

Symptom

Device cannot be

●

detected.

Playback does not

●

start.

Wrong time display.

●

Wrong

file

name

●

display.

Condensation

■

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation

inside the cabinet (CD pickup, etc.) or on the transmitter

on the remote control. Condensation can cause the unit

to malfunction. If this happens, leave the power on with no

disc in the unit until normal playback is possible (about 1

hour). Wipe off any condensation on the transmitter with a

soft cloth before operating the unit.

Before transporting the unit

■

Remove all CDs from the unit. Make sure there is no CD

in the disc tray. Then, set the unit to the power stand-by

mode. Carrying the unit with discs left inside can damage

the unit.

If problem occurs

■

When this product is subjected to strong external

interference (mechanical shock, excessive static electricity,

abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

1�

Set the unit to the stand-by mode and turn the

power on again.

2�

If the unit is not restored in the previous operation,

unplug and plug in the unit again, and then turn

the power on.

Note:

If neither operation above restores the unit, clear all the

memory by resetting it.

Possible cause

Is there any MP3/WMA file

●

available?

the

device

properly

●

connected?

Is it an MTP device?

●

Does the device contain

●

AAC file only?

Is it a copyright protected

●

WMA file?

Is it a false MP3 file?

●

Is Variable

Bitrate

●

being played back?

Is the File Name written

●

in Chinese or Japanese

characters?

Factory reset, clearing all memory

■

1�

Press the ON/STAND-BY button to enter the power

stand-by mode.

2�

Press down the VOLUME + button and

on main unit until "CLR ALL" appears.

Caution:

file

This operation will erase all data stored in memory including

clock, timer settings, tuner preset, and CD program.

Care of compact discs

■

Compact discs are fairly resistant to damage, however

mistracking can occur due to an accumulation of dirt on

the disc surface. Follow the guidelines below for maximum

enjoyment from your CD collection and player.

Do not write on either side of the disc, particularly the

●

non-label side from which signals are read. Do not

mark this surface.

Keep your discs away from direct sunlight, heat, and

●

excessive moisture.

Always hold the CDs by the edges. Fingerprints, dirt,

●

or water on the CDs can cause noise or mistracking.

If a CD is dirty or does not play properly, clean it with

a soft, dry cloth, wiping straight out from the centre,

along the radius.

Maintenance

Cleaning the cabinet

■

Periodically wipe the cabinet with a soft cloth and a diluted

soap solution, then with a dry cloth.

Caution:

Do not use chemicals for cleaning (petrol, paint thinner,

●

etc.). It may damage the cabinet.

Do not apply oil to the inside of the unit. It may cause

●

malfunctions.

E-1

button

YES

Correct