Digit ChyTV HD-mini Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kotak Konverter TV Digit ChyTV HD-mini. Digit ChyTV HD-mini 16 halaman.

Alternately, rather than using a direct connection from ChyTV Tools, content can be

delivered across the Internet to the ChyTV HD device via the ChyTV.net web service.

In this case, the content is still authored and managed off-line on a separate Windows

PC. When completed, the project is packaged and uploaded to the ChyTV.net server's

appropriate account and group. Complete ChyTV.net operations are described

elsewhere. Contact ChyTV Customer Support for more information.

Setting the IP Address of the HD-mini

Before the ChyTV HD device can be connected to directly across the network from

ChyTV Tools, it must be configured with a valid IP address. Since the ChyTV HD device

is a stand-alone appliance, configuring custom parameters such as the IP address are

achieved using the included USB thumb drive. By default, the ChyTV HD device leaves

the factory set to DHCP for dynamic IP allocation. However, it can also be set to a static

IP which will ensure consistent connections with ChyTV Tools going forward.

Upon boot-up, a gray informational screen is displayed for several seconds that shows

the system's IP Address along with MAC Address, software version, screen resolution

and other information. If the system is set for DHCP the IP address should be noted.

To modify the ChyTV HD device's network settings, please take the following steps:

1. Using a Windows PC, insert the included ChyTV HD device USB thumb drive into

an empty USB slot.

2. Using Notepad, open the file IP.TXT for editing.

3. Modify the above networking parameters to their appropriate settings. Note that

in the IP.TXT file, a '#' symbol as the first character on a line indicates that the

line is "commented out" (i.e. ignored).

4. Save IP.TXT file and properly stop and eject USB thumb drive.

5. Power on ChyTV HD device. Wait for complete boot.

6. On the ChyTV HD device, insert the USB thumb drive into an empty USB slot. Note

that only USB 2.0 is currently supported. Therefore the best choice would be one

of the USB slots on the rear panel next to the Ethernet port. The 'blue' USB 3.0

slots should not be used.

7. Wait approximately 20 seconds. The ChyTV HD device will automatically collect

the new networking parameters from the IP.TXT file.

8. Remove the USB thumb drive and restart the ChyTV HD device by turning off

and on again.

The new IP address can be confirmed by 'pinging' from a PC on the network.

Installing the Software

The ChyTV management and creation applications can be found on the included USB

thumb drive. The drive also includes several Sample Projects and utilities and can be

used to initialize the ChyTV device IP address.

Opening the USB drive on a PC will show something like the following: