Sharp XL-UR27H Ketik Manual - Halaman 22
Jelajahi secara online atau unduh pdf Ketik Manual untuk Sistem stereo Sharp XL-UR27H. Sharp XL-UR27H 38 halaman. Micro component system
Juga untuk Sharp XL-UR27H: Panduan Memulai Cepat (2 halaman)
Halaman Cetak
One folder copy (for MP3 disc only)
1
Perform steps 1 - 2 in "Procedure to play back MP3/WMA
disc with folder mode on" section on page 17.
2
Whilst in the stop mode, press the RECORD button to start
USB recording.
"START" will be displayed for a few seconds and recording will
start after the USB device has been initialised.
3
During folder copy process, "COPY" will be displayed.
4
After the last track of a selected folder finishes playing, the
unit will stop playback and recording process automatically
and "WRITING" will be displayed for a few seconds.
Tuner to USB recording
1
To select tuner, press the TUNER (BAND) button and select
desired band station (see "Tuning" on page 23).
2
Press the RECORD button to start recording.
"START" will be displayed for a few seconds and recording will
start after the USB device has been initialised.
3
During recording process, the display show as normal
TUNER function.
[TUNER]
To stop recording:
Press the USB STOP button. The unit will stop the recording process
and "WRITING" will be displayed for a few seconds.
Notes:
Recording can be operated in CD stop mode only. During CD
playback, the RECORD button is invalid.
The sound is heard during CD disc recording but not with an MP3
disc.
Bitrate selection is valid for CD disc and TUNER recording only. It is
invalid for MP3 disc. The default bitrate recording is 128 kbps.
It is not possible to display ID3 tag information during MP3 disc
copy process.
Do not POWER OFF the main unit whilst "WRITING" shows on the
display. Wait until "WRITING" display disappear before turning it
off.
This system does not support WMA disc recording.
"USB FULL" message will be displayed if USB device is set in
write-protect mode or if there is insufficient free space in it.
USB playback order is the same as MP3/WMA playback order
(see page 16) and follow the recording order of the folder.
USB folder structure (of recorded files)
When recording files to USB memory, folders inside it will be created
automatically according to the source selected.
Example:
If recording from CD to USB, the files will be saved in a folder named
CDREC001. For next recording session, the next folder will be
created and named CDREC002 and so on.
If the source is TUNER (FM band), folder FMREC001 will be created.
First layer
Second layer
Maximum number of folders that can be created is 254.
XL-UR27H
ENGLISH
Third layer
(For CD-DA disc)
(For CD MP3 disc)
E-22