Sharp AL-1035-WH A Mulai Manual - Halaman 3

Jelajahi secara online atau unduh pdf Mulai Manual untuk Semua dalam Satu Printer Sharp AL-1035-WH A. Sharp AL-1035-WH A 28 halaman. Digital multifunctional system
Juga untuk Sharp AL-1035-WH A: Panduan Pengoperasian (50 halaman)

Halaman Cetak

English-START GUIDE

This guide indicates important points to note for installation and usage. Read and understand

this guide to ensure that you install the machine correctly. The Operation Guide for the machine

is on the accompanying CD-ROM. Read the Operation Guide to make full use of all the

machine has to offer.

Caution!

For a complete electrical disconnection, pull out the main plug.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Laser information

Wave length

Pulse times (North America and Europe)

Output power

Caution!

Use of controls or adjustments or performance of procedures other than those speciﬁ ed

herein may result in hazardous radiation exposure.

This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)

CAUTION

VORSICHT

ADVARSEL

ADVERSEL

VARNING

VARO!

CAUTION

VORSICHT

ADVARSEL

Installation precautions (Note):

• Do not install the machine on an unstable or

slanted surface. Please install the machine

on a surface which can withstand the weight

of the machine.

• Do not install the machine in the place which

is directly exposed to sunlight, which may

result in machine failure.

• Do not install the machine in a location with

poor air circulation.

(A small amount of ozone is created inside the

machine during printing. The amount of ozone

created is not sufﬁ cient to be harmful; however, an

unpleasant odor may be noticed during large copy

runs, and thus the machine should be installed in a

room with a ventilation fan or windows that provide

sufﬁ cient air circulation. The odor may occasionally

cause headaches.)

* Install the machine so that people are not directly

exposed to exhaust from the machine.

• Be sure to allow the required space around the

machine for servicing and proper ventilation.

20 cm

10 cm

785 nm +10 nm/-15 nm

(41.63 μs ± 100 ns)/7 mm

Max 0.7 mW

ADVERSEL

VARNING

VARO!

• Do not install the machine in a location

with moisture or dust, which may result in

machine failure.

• Do not install the machine in places near

alcohol, paint thinner or other combustibles.

(Because it may result in ﬁ re or electric shock, if the

combustibles contact any electrical part inside the

machine)

• Do not install the machine in places with

obvious changes of temperature and humid-

ity, such as places near heaters, humidiﬁ ers

or air-conditioners.

(In the event of any large

temperature changes, such as moving the machine

from a cold place outdoors into a warm place indoors,

the inside of the machine may generate condensation.

If any condensation occurs, allow for adjustment of

the machine temperature to the room temperature

by letting it sit for at least 2 hours before using the

machine.)

• The machine shall be installed in a place which

is accessible to power socket for connecting the

power. Connect the machine to a power socket

which is not used by other electrical equipment. If

lighting devices are connected to the socket, the

lights may blink.

Environment information

This product is designed for commercial application only and as such it falls outside the scope

of Regulation (EC) 1275/2008 implementing EU Directive 2005/32/EC on eco-design require-

ments for standby and off mode electric power consumption. Sharp does not recommend the

product for domestic application and will not accept any liability for such use.

Products that have earned the ENERGY STAR

environment through superior energy efﬁ ciency.

The products that meet the ENERGY STAR

The products without the logo may not meet the ENERGY STAR

CONTENTS

BEFORE USING THE MACHINE ....................................................................EN1

MACHINE APPEARANCE AND FUNCTIONS INTRODUCTION ...................EN2

SPECIFICATIONS ...........................................................................................EN4

SUPPLIES .......................................................................................................EN4

INFORMATION ON DISPOSAL FOR USERS (PRIVATE HOUSEHOLDS) ..EN4

BEFORE USING THE MACHINE

Please pay attention to the following items when using the machine.

The machine is a precision instrument. When the machine is subject to falling, vibra-

tion shock, ﬁ re or electric shock, please turn off the power and remove the power

plug from the outlet, then contact your dealer or nearest service representative.

Power notes (Warning):

• Be sure to connect the power cord only to a

power outlet that meets the speciﬁ ed voltage

and current requirements. Also make certain

the outlet is properly grounded. Do not use

an extension cord or adapter to connect

other devices to the power outlet used by the

machine. Using an improper power supply

may cause ﬁ re or electrical shock.

(For the power supply requirements, see the name

plate at the bottom of the machine.)

Power notes (Note):

• Apart from the factory-supplied power

supply line of the machine, do not use other

power lines. Otherwise it may result in ﬁ re or

electric shock.

• When removing the power plug from the

outlet, do not pull on the cord.

cord may cause damage such as wire exposure and

breakage, and may result in ﬁ re or electrical shock.)

• If you will not use the machine for a long

time, be sure to remove the power plug from

the outlet for safety.

Handling precautions (Warning):

• Do not put containers with water or other

liquids, or any metal objects which may fall

into the machine, on the machine or beside it.

(If the liquid spills out or any object falls into the

machine, it may result in ﬁ re or electric shock.)

• Do not put heavy objects on the machine, or

press forcefully on the document glass.

(Otherwise, the machine components may be

damaged.)

• Do not remove the case of the machine.

(The high-voltage parts inside the machine may

produce electric shock.)

• Do not alter the machine in any way.

(Any alteration may result in personal injury or

machine damage.)

• Do not clean the machine with the ﬂ am-

mable spray.

(If the gas in the spray contacts the thermionic

component or the fusing unit inside the machine, it

may result in ﬁ re or electric shock.)

Handling precautions (Note):

• Do not look directly at the light source.

(It may hurt your eyes.)

• Do not block the air vent of the machine.

Do not install the machine in a place which

blocks the air vent.

(Blocking the air vent may result in heat accumulation

inside the machine, which may cause the risk of ﬁ re.)

• Move the machine with its handle, and

handle it with great care.

(Before moving the machine, please close the cover,

retract its feeder tray and output tray, turn off the

power switch and unplug the power plug. Then hold

its handle tightly, erect the machine slowly to lift it.)

are designed to protect the

guidelines carry the logo shown above.

guidelines.

• Do not damage or modify the power cord.

(Placing heavy objects on the power cord, pulling it,

or forcibly bending it will damage the cord, resulting in

ﬁ re or electrical shock.)

• Do not insert or remove the power plug with

wet hands, otherwise it may result in electric

shock.

• When moving the machine, switch off the

main power and remove the power plug from

the outlet before moving.

damaged, creating a risk of ﬁ re or electrical shock.)

• Do not bundle the power line, otherwise it

(Pulling on the

may result in ﬁ re or electric shock.

• Please plug the power plug completely into

the power socket, otherwise it may result in

ﬁ re or electric shock.

• This machine is precision equipment. If ma-

chine is dropped or got a hard shock, or, if

there is any smoke, smell or other abnormal

phenomenon, do not use the machine.

(If the machine is used in any of the above cases, it

may result in ﬁ re or electric shock. Please turn off the

power switch immediately and unplug the power plug

from the socket. Please contact your dealer or the

nearest authorized service department.)

• In case of a thunderstorm, please turn off

the power switch and unplug the power plug

from the socket to avoid electric shock and

ﬁ re incurred by lightning.

• If metal or water falls into the machine,

please turn off the power switch and unplug

the power plug from the socket.

(Please contact your dealer or the nearest authorized

service department. Under this circumstance, using

the machine may result in electric shock or ﬁ re.)

• When removing paper jammed, performing

maintenance and closing the cover, please

beware of clamping your ﬁ nger.

• The fusing unit and paper output area are

very hot. Do not touch them when removing

the paper jammed. Be careful not to burn

yourself.

• Do not touch the drum cartridge.

(If there are any scratches or stains on the drum

cartridge, it will cause smudges on the copies.)

• Do not throw toner or the toner cartridge into ﬁ re.

(The toner may splash and result in burns, so please

keep the toner out of reach of children.)

Please give priority to using the

toner that came with the machine.

• When transporting by car, please put the

machine into its original box and place it

on a stable surface (such as on a seat).

(Do not leave the machine in the car for a long

time, as the temperature inside the car may exceed

its allowed range. In addition, avoid bumpy roads

since the bumps may result in machine failure.)

(The cord may be

EN1