Sharp AR-208S Panduan Online - Halaman 35
Jelajahi secara online atau unduh pdf Panduan Online untuk Semua dalam Satu Printer Sharp AR-208S. Sharp AR-208S 43 halaman. Digital multifunctional system
Juga untuk Sharp AR-208S: Brosur & Spesifikasi (4 halaman), Lembar Spesifikasi (2 halaman), Brosur & Spesifikasi (4 halaman), Brosur (1 halaman)
4
TROUBLESHOOTING
Troubleshooting
Problem
Printing is slow.
The printed image is light and
uneven.
The printed image is dirty.
The printed image is skewed or it
runs off the paper.
CONTENTS
Simultaneous use of two or more application software programs.
→ Start printing after quitting all unused application software programs.
The paper is loaded so that printing takes place on the back side of the paper.
→ Some paper types have a front and back side. If the paper is loaded so that printing
takes place on the back side, toner will not adhere well to the paper and a good image
will not be obtained.
You are using paper that is outside the specified size and weight range.
→ Use copy paper within the specified range.
Paper is curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper. During periods
when the machine is not used for a long time, remove the paper from the tray and
store it in a dark place in a bag to prevent moisture absorption.
You did not set sufficient margins in the paper settings of your application.
→ The top and bottom of the paper may be dirty if the margins are set outside of the
specified print quality area.
→ Set the margins in the software application within the specified print quality area.
The size of paper loaded in the tray is not the size specified in the printer driver.
→ Check if the "Paper Size" options suit the size of paper loaded in the tray.
→ If the "Fit to Page" setting is activated, make sure that the paper size selected from
the drop-down list of the "Fit To Paper Size" option is the same as the size of the
loaded paper.
I N D E X
Cause and solution
(part 3)
Page
-
Operation
Manual
Operation
Manual
-
-
-
35