Sharp AR-5516 Mulai Manual - Halaman 19
Jelajahi secara online atau unduh pdf Mulai Manual untuk Semua dalam Satu Printer Sharp AR-5516. Sharp AR-5516 32 halaman. Digital multifunctional system
Halaman Cetak
8
Select the model that you will be
using, and click the "Next" button.
9
Select whether or not you wish the
printer to be your default printer and
click the "Next" button.
Follow the on-screen instructions.
• If you are using Windows Vista and a
security warning window appears, be sure
Caution
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
10
When "The installation of the SHARP
software is complete." appears, click
the "OK" button.
11
You will return to the window of step 3
on page 15.
• To install the Scanner Driver, go to step 12.
• To install the Button Manager, go to step 16.
• If you do not want to install the Scanner Driver or the
Button Manager, go to step 19.
12
Click the "Scanner Driver (TWAIN)"
button.
13
Click the "Yes" button.
• If you are using Windows Vista and a
security warning window appears, be sure
Caution
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
If a message appears regarding the Windows
firewall, click the "Yes" button.
14
When "The installation of the SHARP
software is complete." appears, click
the "OK" button.
15
You will return to the window of step 3
on page 11.
• If you want to install the Button Manager
continuously, go to the next step.
• If you want to end the installation, go to step 19.
16
Click the "Button Manager" button.
Follow the on-screen instructions.
17
When "The installation of the
Software is complete." appears, click
the "Finish" button.
18
You will return to the window of step 3
on page 11.
19
Click the "Close" button to finish the
installation.
To use the scanner driver, you need to
connect to the scanner function using
Note
SC-Scan A (see "CONNECTING TO AND
DISCONNECTING FROM THE SCANNER
FUNCTION USING SC-Scan A" in the
Operation Guide).
This completes the installation of the software.
• If you installed Button Manager, set up Button
Manager as explained in "SETTING UP BUTTON
MANAGER" (p.19).
SETUP
17