INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
Installation method 1
Use this procedure to install the software in the
following environments:
1. Printer connected by LAN cable
2. Windows version: Windows 95/98/Windows Me
Install the software as follows.
Set the IP address of the machine
1
Before installing the printer driver, set the IP
address of the machine using the appropriate key
operator program. For this procedure, see "Key
Operator Programs" (page 6-6) in the printer
operation manual (in PDF format) in the
"PRINTER UTILITIES" CD-ROM. The factory
default setting for the IP address is "DHCP",
which means that the IP address is set
automatically.
If you are not using the machine in a DHCP
environment, ask your network administrator for
the IP address, IP net mask, and IP gateway to be
used for the machine, and then program this
information.
Using the machine in
2
Windows 95/98/Me
To use the machine as a network printer in Windows
95/98/Me, install "SC-Print2000" from the "User
Software" CD-ROM.
For the procedure for installing "SC-Print2000",
see the "Print Server Card Users Manual" in PDF
format in the "User Software" CD-ROM.
More information on installation
During the "SC-Print2000" installation, you must
enter the IP address, IP net mask, and IP gateway
to be used by the machine. Make sure you have
this information at hand before you begin
installation. In the IP address entry screen, you
must also select the internal port name of the Print
Server Card. Be sure to select "lp(AR-NC5J)" for
this name.
Installing the software in
3
Windows 95/98/Me
Install the software as follows.
3-1 Insert the "PRINTER UTILITIES" CD-ROM
that accompanied the machine into your
CD-ROM drive.
3-2 Double-click [My Computer], and then
double-click the CD-ROM icon.
3-3 Double-click the [SETUP] icon.
3-4 Follow the on-screen instructions.
6
G G G G More information on installation
(1) To install the following items, select "User
Tools" in the "Tool Selection" screen.
PCL5c Printer Driver, PCL Display Font, Printer
Status Monitor
(2) To install the following item, select "Administrator
Tools" in the "Tool Selection" screen.
Printer Administration Utility
(3) In the package selection screen, select the
checkboxes of the items that you wish to install.
(4) In the cable selection screen, select "Network"
and then click the [Next] button.
This screen does not appear in Windows 95/NT
4.0.
(5) In the printer port selection screen, do not click
the [Add Network Port] button.
Halaman Cetak