Sharp AR-C260M Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Semua dalam Satu Printer Sharp AR-C260M. Sharp AR-C260M 8 halaman. Color adjustment
Juga untuk Sharp AR-C260M: Operasi Pemindai Jaringan (42 halaman), Panduan Operator Kunci (19 halaman), Panduan Pengoperasian Printer (50 halaman), Panduan Instalasi Perangkat Lunak (25 halaman), Panduan Manajemen Warna (8 halaman), Panduan Instalasi (15 halaman)

Sharp AR-C260M Panduan Pengguna
Adjusting the color balance (additional information for Step 6 on the previ-
ous page)
Test pattern 1 (printed by printer)
Low Density
C
M
Y
Bk
Column 1
1
Place the color chart on test pattern 1 and compare the colors.
For the placement of the color chart, see page 4.
2
In column 1 of test pattern 1, locate the color density level that is the same as "1" in the color chart.
Mark that level with a pencil or pen to help you remember it.
If none of the levels in column 1 match "1" in the color chart, do the following:
• If the density level of "1" in the color chart is darker than the maximum value (+4) in column 1, mark "+4"
in column 1.
• If the density level of "1" in the color chart is lighter than the minimum value (-4) in column 1, mark "-4" in
column 1.
3
Repeat the above step for columns 2 through 12 of test pattern 1, comparing each column with the
corresponding color in the color chart.
4
Enter the levels that you marked on test pattern 1 (each level corresponds to a value from +4 to -4
as indicated on the right ) in the following screen (the screen in Step 6 on the previous page).
C M Y Bk
LOW AREA
How to use the keys in the screen
: Use the
or "HIGH AREA" that you wish to adjust.
: Use the
the standard color chart.
: Use the
+ALL
: To adjust all values simultaneously, select "ALL" with the
with the
5
Perform Step 7 on the previous page.
If you selected "+4" or "-4" for a color that does not have a density level that matches the level in the color
chart, repeat steps 5 through 7 on the previous page.
6
Mid Density
High Density
C
M
Y
Bk
C
M
Y
Bk
Column 12
Color density level
C M Y Bk
MIDDLE AREA
and
keys to select the color (C,M,Y,or Bk) in "LOW AREA", "MIDDLE AREA"
and
keys to select the density level (+4 to -4) that matches the density level in
key to return all values to the default settings.
and
keys.
Color Chart (included with printer)
1 2
C M Y Bk
ALL
HIGH AREA
12
key and then adjust the values