Sharp AR-M161 Panduan Pengoperasian - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Semua dalam Satu Printer Sharp AR-M161. Sharp AR-M161 35 halaman. Digital multifunctional system

Halaman Cetak

SCAN

SCANNER DRIVER SETTINGS

The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the

"Preview screen", which shows the scanned image. For details on the scan settings, click the [Help] button in the

preview screen to display Help.

Set-up Screen

(1)

"Scanning Position" menu

("Scanning Source" in some regions)

Select the location where the original is placed.

Selections are [Platen] (document glass), [SPF

(Simplex)], [SPF (Duplex-Book)] or [SPF

(Duplex-Tablet)].

On machines without an SPF, this setting is

Note

fixed at [Platen].

(2)

"Scanning Mode" menu

Select "Preset" or "Custom Settings" ("Standard"

or "Professional" in some regions) for the

scanning mode.

The "Preset (or Standard)" screen lets you select

the original type as well as monitor, photo, fax, or

OCR according to the purpose of scanning.

If you wish to change the default settings for

these four buttons, or select custom settings such

as the image type and resolution before

scanning, switch to the "Custom Settings (or

Professional)" screen.

For details on the settings, click the [Help] button

in the preview screen to display Help.

(3)

"Image Area" menu

Set the scanning area. To scan the original size

detected by the machine, select [Auto]. The

scanning area can also be specified as desired in

the preview window.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(4)

[Zoom Preview] checkbox

When this is selected, the selected part of the

preview image will be enlarged when the

[Preview] button is clicked.

To return to the regular view, remove the checkmark.

[Zoom Preview] cannot be used when [SPF]

Note

is selected in the "Scanning Position" menu.

(5)

[Preview] button

Previews the document.

If [Preview] is canceled by immediately

Note

pressing the [Esc] key on your keyboard, or

the [C] key (

machine, nothing will appear in the preview

screen.

(6)

[Scan] button

([Scanning] in some regions)

Click to scan an original using the selected

settings. Before clicking the [Scan] button, make

sure the settings are correct.

To cancel a scanning job after the [Scan]

Note

button is clicked, press the [Esc] key on your

keyboard or the [C] key (

(

) on the machine.

(7)

[Close] button

Click to close the scanner driver setup screen.

) or [CA] key (

) on the

) or [CA] key