Sharp AR-M162 Panduan Pengoperasian - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Semua dalam Satu Printer Sharp AR-M162. Sharp AR-M162 35 halaman. Digital copier
Juga untuk Sharp AR-M162: Panduan Referensi Cepat (44 halaman), Panduan Pengguna (3 halaman)

Halaman Cetak

USING THE KEY OPERATOR PROGRAMS

Follow the steps below to access the key operator settings for the printer and scanner functions.

Press the [SPECIAL FUNCTION] key.

The special function screen

appears.

DUPLEX

SPECIAL FUNCTION

DUPLEX SCAN

ACC.

Select "KEY OPERATOR PRG." with

the [ ] or [ ] key.

PQR

DUPLEX

SPECIAL FUNCTION

DUPLEX SCAN

Press the [OK] key.

BACK

GHI

The key operator code

entry screen will appear.

Use the numeric keys to enter the key

operator code.

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

@.- _

FUNCTION

ACC. #-C

READ-END

• " " will appear for each digit entered.

• The mode selection screen will appear.

Select the desired mode with the [ ]

or [ ] key.

SPECIAL FUNCTION

PAPER SIZE SET

DISPLAY CONTRAST

TOTAL COUNT

KEY OPERATOR PRG.

Enter key operator

code.

KEY OPERATOR CODE:

-----

MODE SELECT

KEY OP. # CHANGE

COPIER

PRINTER

SCANNER

MODE SELECT

KEY OP. # CHANGE

COPIER

PRINTER

SCANNER

Press the [OK] key.

The settings of the

selected mode will

appear.

Example: The above screen shows the settings when

printer mode is selected.

Select the desired program with the

[ ] or [ ] key.

• A checkbox appears to the left of several of the

programs. To enable a function (make a checkmark

appear), press the [OK] key. To cancel a selection,

press the [OK] key once again to remove the

checkmark and disable the function. Go to step 9.

• When the [OK] key is pressed for a program that

does not have a checkbox, the settings for the

program appear.

Press the [OK] key and follow the

instructions in the program screen.

To use another program for the same

mode, select the desired program with

the [ ] or [ ] key.

To use a program for a different mode, press the

[BACK] key and select the desired mode. To exit

the key operator programs, press the [CA] key

(

PRINTER

NOTICE PAGE

FORCED OUTPUT OF