Sharp AR-M257 - Digital Imager B/W Laser Setup Manual - Halaman 16

Jelajahi secara online atau unduh pdf Setup Manual untuk Semua dalam Satu Printer Sharp AR-M257 - Digital Imager B/W Laser. Sharp AR-M257 - Digital Imager B/W Laser 20 halaman. Operation manual for network scanner
Juga untuk Sharp AR-M257 - Digital Imager B/W Laser: Panduan Pengoperasian (4 halaman), Brosur & Spesifikasi (8 halaman), Lembar Spesifikasi (2 halaman), Panduan Online (36 halaman), Panduan Pengoperasian (48 halaman)

Halaman Cetak
Sharp AR-M257 - Digital Imager B/W Laser Setup Manual

CONFIGURING THE PRINTER DRIVER

After installing the printer driver, you must configure the printer driver settings appropriately for the
number of paper trays on the machine and the size of paper loaded in each tray.
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers and
Faxes".
In operating systems other than Windows XP,
click the "Start" button, select "Settings", and
then click "Printers".
2
Click the "SHARP AR-XXXX" printer
driver icon and select "Properties"
from the "File" menu.
If you are using Windows NT 4.0/2000/XP, go to
step 4.
3
In Windows 98/Me, click the "Setup"
tab.
4
Click the "Configuration" tab and set
the printer configuration based on the
options that have been installed.
Set the printer configuration properly.
Otherwise, printing may not take place
correctly.
14
5
Click the "Set Tray Status" button and
select the size of paper that is loaded in
each tray.
Select a tray in the "Paper source" menu,
and select the size of paper loaded in that
tray from the "Set Paper Size" menu.
Repeat for each tray.
6
Click the "OK" button in the "Set Tray
Status" window.
7
Click the "OK" button in the printer
properties window.