Sharp AR-M317 AR-5625 Panduan Pengoperasian - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Semua dalam Satu Printer Sharp AR-M317 AR-5625. Sharp AR-M317 AR-5625 48 halaman. Operation manual for network scanner
Juga untuk Sharp AR-M317 AR-5625: Panduan Pengoperasian (4 halaman), Brosur & Spesifikasi (8 halaman), Lembar Spesifikasi (2 halaman), Panduan Online (36 halaman), Setup Manual (20 halaman)
Halaman Cetak
HOW TO USE THE NETWORK SCANNER FUNCTION
SELECTING THE RESOLUTION
The resolution for scanning an original can be selected. Load the original in scanner mode and then follow the steps
below. The factory default setting for the resolution is "300 dpi".
Change the resolution
1
Touch the [RESOLUTION] key.
QUALITY
300dpi
RESOLUTION
TIFF-G4
FILE FORMAT
AUTO
8½X11
ORIGINAL
2
Touch the desired resolution key.
200dpi
300dpi
600dpi
3
Touch the [OK] key.
OK
200dpi
300dpi
600dpi
• The resolution is initially set to 300 dpi (factory default setting). A resolution of 200 dpi or 300 dpi produces
Note
sufficiently clear image data for normal text originals. (200 dpi is equivalent to the "Fine" character mode used
for facsimiles).
The 600 dpi setting should only be used in cases where high-clarity image reproduction is required, such as a
photograph or an illustration. Note that a high resolution setting will result in a larger file size, and transmission
may not be successful if there is insufficient disk capacity in the server to which the image is sent (or if the
administrator of the server has restricted the file size). If transmission is not successful, you can try such
measures as reducing the number of scanned pages in the file or reducing the scan size setting for the original
("MANUALLY SETTING THE SCANNING SIZE" (p.26)).
• The default resolution setting can be changed in the key operator programs. (See "INITIAL RESOLUTION
SETTING" in the key operator's guide.)
• The resolution setting cannot be changed once scanning has begun.
28
Touch the resolution key
that is most suitable for
the original.
The selected key will be
highlighted.
You will return to the
initial screen.