Sharp AR-M550U Panduan Operator Kunci - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Operator Kunci untuk Semua dalam Satu Printer Sharp AR-M550U. Sharp AR-M550U 20 halaman. Digital multifunctional system
Juga untuk Sharp AR-M550U: Panduan Teknis (48 halaman)

Halaman Cetak

PROGRAMS FOR COPY MODE

Initial tab copy setting

This program is used to set the initial image shift width

(tab width) for tab copying.

The width can be set from 0 mm to 20 mm (0" to 5/8")

in increments of 1 mm (1/8").

Tab width

Setting a maximum number of copies

This program is used to set the maximum number of

copies that are allowed per original.

Any number from 1 to 999 can be set for the maximum.

The maximum number of copies is initially set to 999.

Disabling deletion of job programs

This program is used to prohibit the deletion and

changing of copy settings stored in job programs.

Disabling of bypass-tray in duplex copy

This program is used to disable the use of the bypass

tray when making duplex copies.

The bypass tray is often used to feed label sheets,

transparency film, and other special papers for which

two-sided copying is prohibited. If one of these special

papers enters the reversing unit, a misfeed or damage

to the unit may result. If special papers for which

two-sided copying is prohibited are often used, it is

recommended that you enable this program to prevent

feeding of special papers from the bypass tray into the

reversing unit during two-sided copying.

Disabling of auto paper selection

This program is used to disable the auto paper

selection function.

When this program is enabled, paper that is the same

size as the original placed on the document glass or in

the automatic document feeder is not automatically

selected.