Sharp AR-NB3 Manual Pencetakan - Halaman 25

Jelajahi secara online atau unduh pdf Manual Pencetakan untuk Semua dalam Satu Printer Sharp AR-NB3. Sharp AR-NB3 41 halaman. Digital copier/printer/multifunctional system option
Juga untuk Sharp AR-NB3: Operasi Pemindai Jaringan (40 halaman), Manual Opsi (44 halaman)

Halaman Cetak

WEB FUNCTIONS OF THE MACHINE

Printer condition settings

Factory default settings are indicated in bold.

Default settings

Item

Copies

Orientation

Default Paper Size

Default Paper Source

Disable Blank Page Print Enable, Disable

2-Sided Print

ROPM*

PCL settings

Item

Symbol Set

Font

Line Feed Code

Wide A4

PostScript settings

"PostScript Settings" only appears when the PS3 expansion kit is installed.

Item

Print PS Errors

Settings

1-999

Portrait, Landscape

A3, B4, A4, A4R, B5,

B5R, A5, Ledger,

Legal, Foolscap,

Letter*, Letter-R,

Invoice

Auto, Tray 1,

Tray 2*, Tray 3*,

Tray 4*, Bypass

(Manual), Bypass (Auto)

1-Sided,

2-Sided (Book),

2-Sided (Tablet)

Enable, Disable

Settings

Select one of 35 sets.

Select one internal or

one expansion font.

CR=CR; LF=LF;

FF=FF, CR=CR+LF;

LF=LF; FF=FF,

CR=CR; LF=CR+LF;

FF=CR+FF,

CR=CR+LF;

LF=CR+LF;

FF=CR+FF

Enable, Disable

Settings

Enable, Disable

This is used to select the number of copies.

This sets the orientation of the printed page. Select [Portrait]

when the image is longer in the vertical direction, or [Landscape]

when the image is longer in the horizontal direction.

This sets the default paper size used for printing. Even if the

set size of paper is not in any of the trays, the printed image

is formed in accordance with this setting.

*Factory default setting is A4 in some regions.

Set the default paper tray.

*Selections available depend on the trays that are installed.

When this is set to "Enable", blank pages are not printed.

When [2-Sided (Book)] is selected, two-sided printing takes place

so as to allow binding at the left side. When [2-Sided (Tablet)] is

selected, two-sided printing takes place so as to allow binding at

the top. (Only for models that support two-sided printing.)

This enables the ROPM function. When enabled, multi-page

print jobs are stored in memory before printing, and thus the

computer does not need to repeatedly send the print data

when multiple copies are printed.

* This setting is only effective when the dual function board is

installed.

This specifies which country's characters (PCL symbol set)

are assigned to certain of the symbols in the character code

list. The factory default setting is [PC-8].

This specifies which PCL font to use for printing. One font can

be specified from among the internal fonts and expansion

fonts (when the barcode font kit or the Flash ROM kit is

installed). The factory default setting is [0:Courier].

This specifies the line break code by means of a combination

of the "CR" (return) code, "LF" (line break) code, and "FF"

(page break) code. The factory default setting is printing

based on the transmitted code. The setting can be changed

by selecting one of four combinations.

This setting can be enabled to print 80 lines on A4 size paper

with each line 10CPI font (English characters). When the

setting is disabled (a checkmark does not appear), each line

is 78 characters long.

When this setting is enabled, an error description is printed

each time a PostScript error occurs.

Description