Sharp AR-NB3 Manual Opsi - Halaman 5

Jelajahi secara online atau unduh pdf Manual Opsi untuk Semua dalam Satu Printer Sharp AR-NB3. Sharp AR-NB3 44 halaman. Digital copier/printer/multifunctional system option
Juga untuk Sharp AR-NB3: Manual Pencetakan (41 halaman), Operasi Pemindai Jaringan (40 halaman)

Sharp AR-NB3 Manual Opsi
Function
Graphics
Resolution
Halftone
Graphics Mode
Zoom
Mirror Image
Negative Image
Fit To Page
Font
Resident fonts
Selectable download fonts
Other functions
Automatic configuration
settings
ROPM (*9)
Overlay
Job Control
Watermark
Job Compression
Bitmap Compression
(*1) N-up printing cannot be used in Windows NT 4.0. In Windows 2000/XP/Server 2003, 2, 4, 6, 9, and 16 N-up printing can be used.
(*2)Only for the model with the duplex print function.
(*3) For Windows 2000/ XP/ Server 2003, the center binding print can be made.
(*4) For Windows NT4.0, the custom paper setting cannot be made. For Windows 2000/ XP/ Server 2003, the custom paper setting can be made in
one size.
(*5) Cannot be used in Mac OS X v10.1.5.
(*6) For Windows NT4.0, there are 35 built-in fonts available.
(*7) For some versions of LaserWriter, selection of Type 1 or True Type can be made.
(*8) Cannot be used in Mac OS X.
(*9) Can only be used when the dual function board is installed.
(3) PDF/TIFF direct printing function
PDF and TIFF files can be specified from a web page and directly
printed out.
(4) Limitations (printing function)
If a print request for GDI/SPLC data is made, an error message is
printed out.
(5) Printer condition setup
The following setup can be made from the web page.
Function
Number of copies
1 - 999
Standard paper source
Tray (auto/manual (auto)/
Trays 1 - 4)
Printing of blank paper is
No
prohibited.
Duplex printing
One side/Both sides (long
side/short side)
ROPM
On/Off
PCL5e
600/ 300dpi
u
o
u
u
u
80 fonts
Bitmap, True Type, Graphics
u
u
Item
Default
1
Auto
No
One side
On
AR-NB3 SPECIFICATIONS
1 – 3
PCL6
PS
o
o
136 fonts
Bitmap, Type 1, True Type
o
o
o
o
o
o
o
(6) Network status page
The network status pages shows a list of settings about the network.
Data are printed out in the A4 or letter size in US English regardless of
the destination and OS language selected.
The status page can be printed out by pressing the status switch on the
network expansion kit.
Note:
1. The name of the printer is printed under the item "printer name."
2. When WINS is disabled, "WINS server 1-5" is not displayed. It is
displayed when a value is set or information is acquired from the
DHCP server.
Any server which responds normally to the registration of WINS is
marked with an asterisk "∗".
"WINS server" shows up to 5 values: 2 settings, 2 DHCP values,
and broadcast. However, the broadcast operates only when no nor-
mal response is returned from any server.
3. The "WINS Scope ID" is displayed only when a value is set or when
information is acquired from the DHCP server and more than one
piece of information is valid as a WINS server.
Windows PPD
Mac PPD
600dpi
u
u
o
o
o
u
136 fonts
35 fonts
u (*7)
u
o (*8)
u
u
o (*5)
u
u