Sharp DX-2500N Panduan Pengaturan Perangkat Lunak - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Pengaturan Perangkat Lunak untuk Semua dalam Satu Printer Sharp DX-2500N. Sharp DX-2500N 43 halaman.

If automatic configuration fails

• You can check the options that are installed and the tray settings by printing out the "All Custom Setting List". (However,

note that "Input Tray Options" must be set to the number of trays on the machine.)

To print out the "All Custom Setting List", see the Operation Guide.

• Click the [Set Tray Status] button, the [Paper Type Name] button, and the [Set Tandem Print]* button to check the settings

of each.

Set Tray Status: The "Tray Settings" in "Paper Tray Settings" in system settings of the machine are reflected in the

settings shown here. Specify the size and type of paper loaded in each tray.

Paper Type Name: The "Paper Type Registration" settings in "Paper Tray Settings" in the system settings of the machine

are reflected in the settings shown here. If a user type name (1 to 7) was changed, enter the changed

name.

Set Tandem Print*: Enter the setting (the IP address of the slave machine) in "Tandem Connection Setting" in the system

settings (administrator) of the machine.

* "Set Tandem Print" can only be configured when the printer driver is installed using a "Custom installation" with "LPR

Direct Print (Specify Address/Auto Search)" selected.

Not displayed in case of Sharp Advanced Printing Language-c printer driver.

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER