Sharp MX-2300N Guide Panduan Pemecahan Masalah - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Semua dalam Satu Printer Sharp MX-2300N Guide. Sharp MX-2300N Guide 44 halaman. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Juga untuk Sharp MX-2300N Guide: Spesifikasi (2 halaman), Panduan Keselamatan (28 halaman), Manual Pengarsipan Dokumen (47 halaman), Petunjuk Pindai ke Email (7 halaman), Panduan Pengaturan Perangkat Lunak (48 halaman)
Halaman Cetak
Problem
A tray, finisher, or
other peripheral
device installed on the
machine cannot be
used.
Problems Related to Print Results
Problem
The image is grainy.
The image is too light
or too dark.
Colours are off.
Text and lines are faint
and difficult to see.
Point to check
Have the peripheral devices that are
installed on the machine been
configured in the printer driver?
Point to check
Are the printer driver settings
appropriate for the print job?
(Windows)
Does the image (particularly a photo)
need correction?
(Windows)
Did you perform "Registration
Adjustment"?
Was colour data printed in black and
white?
(Windows)
Solution
Open the printer properties and click the [Auto
Configuration] button on the [Configuration] tab.
(Windows)
* If auto configuration cannot be executed, see the
Software Setup Guide.
Solution
If you are using the SPLC-c or PCL printer driver, you
can set the resolution to [600 dpi] or [300 dpi] in the print
settings at the time of printing. When you need a very
clear image, select [600 dpi].
If you are using the PS printer driver, you can set the
resolution to [600x600 dpi] or [1200x600 dpi] (only for
black and white printing).
The resolution setting is selected in the [Advanced] tab
of the printer driver properties window.
Brightness and contrast can be corrected by performing
[Color Adjustment] on the [Color] tab of the printer
driver. These settings can be used for simple
corrections when you do not have image editing
software installed on your computer.
Ask your administrator to perform "Registration
Adjustment".
➞ System Settings (Administrator) > "Device Control" >
"Registration Adjustment" > "Auto Adjustment"
If the colour tones are off, perform "Auto Colour
Calibration". (If the colours are still off after calibration,
repeating calibration may improve the results.)
➞ System Settings (Administrator) > "Printer Settings" >
"Colour Adjustments" > "Auto Colour Calibration"
When colour text and lines are printed in black and
white, they may become faint and difficult to see. To
have colour text or lines (areas) that are faint converted
to black, select [Text To Black] or [Vector To Black] on
the [Color] tab of the printer driver. (Correction of
graphics data such as bitmap image is not possible.)
13