Sharp PN-L802B Panduan Pengaturan Perangkat Lunak - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Pengaturan Perangkat Lunak untuk Semua dalam Satu Printer Sharp PN-L802B. Sharp PN-L802B 46 halaman. Touchscreen
Juga untuk Sharp PN-L802B: Panduan Pengoperasian (9 halaman), Panduan Pengoperasian (48 halaman), Setup Manual (28 halaman), Panduan Pengguna (13 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (28 halaman), Panduan Memulai Cepat (1 halaman), Mulai Manual (24 halaman), Garansi (2 halaman), Manual Koneksi (1 halaman), Brosur & Spesifikasi (4 halaman)

CHANGING THE PORT

When using the machine in a Windows environment, follow the steps below to change the port when you have changed

the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If

the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP

Port" (page 31) for the remaining steps of the procedure to change the port.

Click the [Start] button (

[Control Panel], and then click [Printer].

• In Windows XP/Server 2003, click the [start] button

and then click [Printers and Faxes].

• In Windows 2000, click the [Start] button, select

[Settings], and then click [Printers].

If [Printers and Faxes] does not appear in the [start]

menu in Windows XP, click the [start] button, click

[Control Panel], click [Printers and Other Hardware],

and then click [Printers and Faxes].

Open the printer properties window.

(1) Right-click the printer driver icon of the

machine.

(2) Select [Properties].

), click

Adding or changing a port.

(2)

(1) Click the [Ports] tab.

(2) Click the [Add Port] button.

To change to a previously created port such as USB

port, select the desired port (USB001, etc.) from the

list and click the [Apply] button. This changes the port.

(1)