Sharp PN-L802B Panduan Pengaturan Perangkat Lunak - Halaman 43

Jelajahi secara online atau unduh pdf Panduan Pengaturan Perangkat Lunak untuk Semua dalam Satu Printer Sharp PN-L802B. Sharp PN-L802B 46 halaman. Touchscreen
Juga untuk Sharp PN-L802B: Panduan Pengoperasian (9 halaman), Panduan Pengoperasian (48 halaman), Setup Manual (28 halaman), Panduan Pengguna (13 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (1 halaman), Panduan Memulai Cepat (28 halaman), Panduan Memulai Cepat (1 halaman), Mulai Manual (24 halaman), Garansi (2 halaman), Manual Koneksi (1 halaman), Brosur & Spesifikasi (4 halaman)

Halaman Cetak
Sharp PN-L802B Panduan Pengaturan Perangkat Lunak
Problem
The machine is not
detected (when
connected to a
network).
The plug and play
screen does not
appear (USB
connection in
Windows).
Point to check
Is the machine power on?
Is your computer connected correctly to
the machine?
Is the machine power on?
Can your computer use a USB
connection?
WHEN INSTALLATION WAS NOT SUCCESSFUL
Solution
If the machine is powered off, it will not be detected.
Switch on the main power switch and the [POWER] key
(
) in that order. (In Windows, search again after
powering on the machine.)
Make sure that the cable is connected securely to the
LAN connectors on your computer and the machine.
Check the connections at the hub as well.
☞
CONNECTING TO A NETWORK (page 7)
When a USB cable is connected, make sure the power
of the machine is "ON" and then connect a USB cable to
the machine. When the machine is not powered on,
switch on the main power switch and the [POWER] key
(
) in that order.
Check your computer whether or not a USB interface
can be used on the Device Manager in your computer.
(For information on "Device Manager", see Help in
Windows.)
If USB can be used, your controller chipset type and
root hub will appear in "Universal Serial Bus controllers"
in "Device Manager". (The items that appear will vary
depending on your computer.)
If these two items appear, USB should be useable. If a
yellow exclamation point appears next to "Universal
Serial Bus controllers" or the two items do not appear,
refer to your computer manual or check with the
manufacturer of your computer to enable USB and then
reinstall the printer driver.
41