Sharp SJ-43N-SL1/WH1 Panduan Servis - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Servis untuk Kulkas Sharp SJ-43N-SL1/WH1. Sharp SJ-43N-SL1/WH1 36 halaman.
3. DEFROST HEATER
(1) Taking-out Evaporator
(1)-1. Take out E.v cover ass'y (Fig. A-16).
Evaporator
Food liner convex part
Fig. A-16
(1)-2. As shown in Fig. A-17, pull the upper part of
Evaporator toward you, pull it diagonally so that
the pipe of Evaporator does not contact the convex
part of food liner.
Food liner convex part
Evaporator
Pipe
Fig. A-17
(1)-3. As shown in Fig. A-18, bend the removed
Evaporator horizontally so that Defrost heater can
be replaced easily.
NOTE: When pulling Evaporator and bending the
pipes, pay attention so as not to break and
deform the pipes. Still, take care not to hurt
yourself by fin of Evaporator.
Evaporator
Fig. A-18
(2) Replacement of Def. heater ass'y.
(2)-1 Remove the center screw of Drain support al
to take it off from the food liner.
Screw
(2)-2 Raise the protrusion part of Drain support al.
Then remove Heater cover.
Drain support al
Protrusion part of Drain support al(2 pcs.)
Heater cover
(2)-3 Open Def.heater fixed part of Drain support al to
the right and left, then remove Def.heater ass'y.
Drain support al
23
Drain support al
Fig. A-19
Protrusion parts
Heater cover
Def. heater ass'y
Fig. A-20
Fixed parts
Def.heater ass'y
Fig. A-21
SJ-P43N/43N
SJ-P47N/47N