Digital Acoustics EDW-PoE Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem interkom Digital Acoustics EDW-PoE. Digital Acoustics EDW-PoE 16 halaman. Ed/es series ii3 ip intercom

Halaman Cetak

LED INDICATORS

The four LEDs marked Active, Link, Monitor/Open and Talk can provide the
following diagnostic information:
Operational Mode
Normal operational mode. TalkMaster
is active. Intercom can communicate.
LAN connection is inactive. The RJ45
may be unplugged, or the cable may
be defective.
Intercom has not been configured yet
or has been configured for DHCP, but
no DHCP Server is available. To turn
off DHCP, power cycle the Intercom
while holding down the + and - buttons
(Volume up and Volume down)
TalkMaster™ Server software is not
running or not set to communicate.
TalkMaster software at the server has
"Searched" for intercoms in the
Configuration Mode utility setup
Receiving audio. The server software
(TalkMaster™) / PC microphone is on.
Sending audio. Talk button is pressed
or server has engaged "listen" mode.
Intercom is in "Server" mode, waiting
for a client to request connection
(Active LED flash alternates 1sec fast - 1sec slow)
Local "Monitor" button has been
depressed. Microphone is set to
constant "Talk" mode for monitoring
Active
Link
ON
ON
FLASH
OFF
FLASH
ON
FLASH
ON
FAST
ON
FLASH
ON
ON
ON
ON
DUAL
-
FLASH
ON
ON
- 10 -
Monitor/
Talk
Open
-
-
-
-
-
ON
-
-
-
-
-
FLASH
-
ON
-
-
ON
ON