Crestron CEN-AVF-HUB Dari Manual

Jelajahi secara online atau unduh pdf Dari Manual untuk Beralih Crestron CEN-AVF-HUB. Crestron CEN-AVF-HUB 2 halaman. Av framework hub

Halaman Cetak

GUIDE

CEN(I)-AVF-HUB

.AV Framework™ Hub

The CEN-AVF-HUB and CENI-AVF-HUB are functionally identical. For simplicity within this guide,

the term "CEN-AVF-HUB" is used.

Install the Device

The Crestron

CEN-AVF-HUB can be mounted onto a DIN rail, mounted to any flat surface, or placed

on a tabletop. If necessary, use screws that are applicable for the mounting method. See the diagrams

below for installation options.

NOTE:

The CEN-AVF-HUB can also be rack mounted. For rack mount installation, refer to the

RMK-IFE-1U Installation Guide (Doc. 7627) at www.crestron.com/manuals.

Flat Surface Mounting

Din Rail Mounting

NOTE:

Do not use the supplied screws to mount the bracket to the bottom of the CEN-AVF-HUB if the

device will be mounted on a DIN rail. Removing the CEN-AVF-HUB from the DIN rail is not possible.

Connect the Device

On the CEN-AVF-HUB, connect the Power over Ethernet (PoE) port to a PoE injector or a LAN

connection that supplies Power over Ethernet. If desired, connect a power supply (sold separately) to the

CEN-AVF-HUB and then to an electrical outlet. See below for connection ports.

Wire with PoE

Wire with Optional Power Supply

Power

Supply

Configure the Device

Once all connections have been made, the

CEN-AVF-HUB is configured with the built-in, web-based setup tool.

1. Use a web browser to navigate to http://hostname where hostname is the host name or IP address

of the CEN-AVF-HUB. The host name for the CEN-AVF-HUB is CEN-AV- plus the last eight

characters of the MAC address. The MAC address can be found on the label located on the bottom

of the CEN-AVF-HUB. For example, the host name of a CEN-AVF-HUB with the MAC address

00107F2ED7CB is CEN-AV-7F2ED7CB. Once the device is connected, the CONFIGURE HUB

screen is displayed.

2. Enter the IP address or host name of the cloud-based or local Crestron Fusion

field is left blank, the Crestron Fusion server must be pointed to the CEN-AVF-HUB to retrieve its

configuration (RVI) file.

Click

to view or change the device's Ethernet settings, configure the automatic update feature, or

view information about the CEN-AVF-HUB.

LAN PoE

LAN

NOTE:

Changing the IP address or host name causes the CEN-AVF-HUB to reboot.

3. Click NEXT. The DEFINE ROOMS screen is displayed.

Check the Box

QUANTITY

PRODUCT

Bracket, Mounting, Integrated DIN Rail Clip

Cable, Ethernet, CAT5e, 5' (1.52 m)

Connector, 4-Pin

Screw, 6-32 x 3/8", Pan Head, Phillips

4. Use the DEFINE ROOMS screen to add a room, change an existing room's configuration, or delete

a room.

• Add a Room

a. Click ADD ROOM.

b. Enter a name for the room in the ROOM NAME field.

c. Enter the IP address or host name of the HD-MD-400-C-E installed in the room in the

server. If this

d. Enter the names to be used for the receiver and transmitter inputs in the NAME field.

e. Use the mouse to select CEC Control or RS-232 Control. If RS-232 control is selected, enter

f. Click SAVE to save the room settings and return to the DEFINE ROOMS screen, or click

COLOR

Black

HD-MD-400-C-E IP/HOSTNAME field.

The CEN-AVF-HUB currently supports the AM-101 AirMedia

Presentation Gateway, the

HD-MD400-C-E HD Scaling Presentation Switcher & Extender 400, and any CEC or RS-232

controlled display device.

If an input name represents a connection to an AM-101, check the box next to the input name.

NOTE:

Only one input can be associated with an AM-101.

the Power On command and the Power Off command in the respective fields, and click RS-

232 Configuration to configure RS-232 communications.

CANCEL to cancel.

PART NUMBER

4519035

2022311

2003576

2007225