Sharp SJ-XE676F Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kulkas Sharp SJ-XE676F. Sharp SJ-XE676F 16 halaman. Refrigerator - freezer
Halaman Cetak
Control panel
Select
button
Switching
button
Enter
button
Operations of useful modes
Select the mode icon.
1
Select on/off.
2
Complete the setting.
(Beep)
3
"Express cool"only
Complete the setting by pressing
for 3 seconds or more.
(Beep, Beep, Beep)
Operation of additional modes
Door alarm • When the refrigerator or freezer door is left open for over
1 minute, door alarm sounds once, and again after 1
minute.
• If the door is left open for approx. 3 minutes, the alarm
sounds continuously.
• The alarm stops after the door is closed.
• When you want to switch off button operation sound.
Sound
of button
operation
Note
• When you want to turn on the additional mode, follow the same step again. (The indicator turns on.)
8
Useful modes
Icon
Meaning
Extra cool
Express freezing
Express cool
Controlling temperature
Icon
Meaning
Refrigerator
compartment
Freezer compartment
Additional modes
Indicator
Meaning
Door alarm
Sound of button
operation
Display
(e.g. Extra cool)
Mode icon turns
on.
"Express cool"
only
(Flashing)
Summary
Default setting
OFF
Default setting
3°C
-18°C
Default setting
ON
When
icons change in the order shown as
Flashing
below.
(off)
Mode icon turns
off on the standby
display.
Cancel operation
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Press
for 3 seconds or more.
(Beep, Beep, Beep)
Note
• When you press one of the
buttons, all icons flash once and
show the standby display. If the
refrigerator stops because of
power failure, the modes except
for Extra Cool and Express
Freezing function the same way
as before at the time of re-power.
• Operation is invalid while
the refrigerator door is
open.
• Mode icons or indicators
in operation light up on
the standby display.
When Express cool is
in operation, the icon
flashes on the standby
display.
• When there is no
operation for
approximately
1 minute, the
display returns to the standby
display automatically. The
standby display turns off if there is
no operation for another
1 minute.
button is pressed, the
Standby display
:
Useful modes
and
simultaneously
The indicator
and
simultaneously
The indicator
Turn-on state
Display
turns off.
turns off.