Sharp SJ-XP59PG Panduan Pengoperasian - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kulkas Sharp SJ-XP59PG. Sharp SJ-XP59PG 28 halaman.
Juga untuk Sharp SJ-XP59PG: Panduan Pengoperasian (28 halaman), Panduan Pengoperasian (28 halaman)
Halaman Cetak
Controlling temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature as below.
How to check the current
temperature setting
The indicator lights up to show the current temperature
level by pressing "F" or "R" button.
Freezer compartment
Refrigerator compartment : Press "R" button.
Setting of Freezer/Refrigerator
compartment
Freezer compartment
1
Press "F" button.
2
Press "F" button to change the temperature level.
Refrigerator compartment
1
Press "R" button.
2
Press "R" button to change the temperature level.
Advanced Setting of Freezer/Refrigerator
compartment
The temperature of refrigerator compartment and freezer
compartment can be adjusted in 9 levels (level 1 ~ 9) by following
the steps a to b.
Freezer compartment
a
Press "F" button first. Hold down "F" button and then press
"Express freezing" button for 3 seconds or more.
The indicator returns to "Default setting".
b
Press "F" button to change the temperature level.
Follow the steps a to b if you want to adjust the temperature in 5
levels.
Refrigerator compartment
a
Press "R" button first. Hold down "R" button and then press
"Express freezing" button for 3 seconds or more.
The indicator returns to "Default setting".
b
Press "R" button to change the temperature level.
Follow the steps a to b if you want to adjust the temperature in 5
levels.
: Press "F" button.
Beep
Beep
Beep beep beep
Beep beep beep
• Temperature indicator changes as the picture below
(3→4→5→1→2→3) by pressing "F" or "R" button.
Level
1
2
3
Default setting
4
5
Note
• After adjusting the temperature level, the indicator turns
off approximately 5 seconds later.
• The temperature setting remains the same even after
power failure.
• Temperature indicator changes as the picture
below (5→6→7→8→9→1→2→3→4→5) by
pressing "F" or "R" button.
...
OFF
Level
1
2
3
4
5
Default setting
6
7
8
9
Indicator
...
...
Lighting
Flashing
Indicator
23