Digital Acoustics IP7-SE8 Panduan Memulai - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Penguat Digital Acoustics IP7-SE8. Digital Acoustics IP7-SE8 4 halaman. Ip intercom/paging
Juga untuk Digital Acoustics IP7-SE8: Panduan Memulai (16 halaman)

Halaman Cetak

Start the Operator Console

• Logon with an assigned Operator ID and

Password or as the admin

• Specify the IP Address of the TalkMaster Server

(specify 127.0.0.1 if the Operator Console is

running on the TalkMaster Server PC)

• IP Endpoints will appear on the Intercoms tab or as part of the Paging

Groups tab of the Operator Console

• The PC's microphone is used to send audio to an IP Endpoint

• The audio from an IP Endpoint can be heard on the PC's speakers

Inbound Calls

• When the Talk button attached to the IP7 is pressed, Operator Console will

display the Incoming Call dialog and sound an audible alarm

• Click and hold the Talk button, or press and hold the Space Bar to speak

to the IP Endpoint

• Release the Talk button or Space Bar to automatically activate the Listen

button

• All incoming calls will be listed in the Calls Waiting list and remain "in

session" until removed from the Calls Waiting list by clicking the End

button, or pressing the Escape key

Outbound Calls

• To make an outbound call, select an IP Endpoint by clicking on it and press

the Talk or Listen button

• Click the Listen button or press the Escape Key to end the call

Open Door

• To open a door, select the Intercom, the click the Door Open Icon or

press the Enter key

Refer to the IP7-SE8 Hardware Reference Manual for detailed information on wiring,

setup, configuring IP addresses and additional software settings.

IP7-SE8 GettingStartedGuide.docu TalkMaster, IP7 and Digital Acoustics® are

trademarks of Digital Acoustics LLC. Other trademarks are the property

www.digitalacoustics.com/support

Page 4 of 4

IP7-SE8™

Getting Started Guide

p/n 6621