Sharp Conference Series XG-PH80X-N Setup Manual - Halaman 27

Jelajahi secara online atau unduh pdf Setup Manual untuk Proyektor Sharp Conference Series XG-PH80X-N. Sharp Conference Series XG-PH80X-N 32 halaman. True xga/wxga dlp conference projectors conference series
Juga untuk Sharp Conference Series XG-PH80X-N: Brosur & Spesifikasi (4 halaman), Lembar Spesifikasi (4 halaman)

Halaman Cetak
Sharp Conference Series XG-PH80X-N Setup Manual

Operating the Projector Using the PJLink

The projector conforms with the PJLink
The commands to be used in controlling the projector by the PJLink
shown below.
CONTROL CONTENTS
Power Control
Off
On
Power Status Query
Input List Query
Input Change
COMPUTER1
COMPUTER2
COMPONENT
S-VIDEO
VIDEO
DVI
Input Status Query
AV Mute
Off
On
AV Mute Status Query
Lamp Query
Error Condition Query
Projector Name Query
Manufacture Name Query
Product Name Query
Other Information Query
Class Information Query
TM
PJLink
Authentication:
To activate the password used for PJLink
(page 26). When operating without authentication, set "PJLink (Password)" to "Disable".
PJLink
TM
Compliant:
This product conforms with the PJLink standard Class 1 and all Class 1 commands are implemented.
This product confi rms with the PJLink standard specifi cation version 1.00.
For additional information, visit "http://pjlink.jbmia.or.jp/english/".
TM
standard Class 1.
COMMAND
P O W R _ 0
P O W R _ 1
P O W R _ ?
I
N S T _ ?
I
N P T _ 1 1
I
N P T _ 1 2
I
N P T _ 2 1
I
N P T _ 2 2
I
N P T _ 2 3
I
N P T _ 3 1
I
N P T _ ?
A V M T _ 3 0
A V M T _ 3 1
A V M T _ ?
L A M P _ ?
E R S T _ ?
N A M E _ ?
I
N F 1 _ ?
I
N F 2 _ ?
I
N F O _ ?
C L S S _ ?
TM
, set "PJLink (Password)" to "Enable" and then enter the password
TM
Protocol
TM
protocol are as
RETURN
OK or ERR3
OK or ERR3
0: Standby Mode
1: Power On
2: Standby (Cooling)
3: Power On (Warming up)
11 12 21 22 23 31
OK or ERR3
OK or ERR3
OK or ERR3
OK or ERR3
OK or ERR3
OK or ERR3
11: COMPUTER1
12: COMPUTER2
21: COMPONENT
22: S-VIDEO
23: VIDEO
31: DVI
or ERR3
OK or ERR3
OK or ERR3
30: Off
31: On
or ERR3
1st Number: Lamp1 Usage Time (Hour)
2nd Number: 0: Lamp1 Off 1: Lamp1 on
3rd Number: Lamp2 Usage Time (Hour)
4th Number: 0: Lamp2 Off 1: Lamp2 on
1st Byte: Fan Error Status
2nd Byte: Lamp Error Status
3rd Byte: Temp. Error Status
4th Byte: Cover Open Status
5th Byte: Not Used, Return 0
6th Byte: Not Used, Return 0
0: No Error Detected
1: Warning
2: Error Detected
Projector Name
SHARP
XG-PH80W-N/XG-PH80X-N
Not used
1
-27