Sharp Notevision XG-C435X-L Setup Manual - Halaman 39

Jelajahi secara online atau unduh pdf Setup Manual untuk Proyektor Sharp Notevision XG-C435X-L. Sharp Notevision XG-C435X-L 46 halaman. 4000 ansi lumens conference series projector
Juga untuk Sharp Notevision XG-C435X-L: Lembar Spesifikasi (2 halaman), Spesifikasi (2 halaman)

Halaman Cetak

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use the communications program to

send a command to reset the lamp timer. The example below uses Windows

ating system. When you use Windows Vista

the following steps, because Windows Vista

Click "Start" – "All Programs" –

"Accessories" – "Communica-

tions" – "HyperTerminal".

• If you do not have HyperTerminal in-

stalled, see the operation manual of your

computer.

• Depending on the settings of your com-

puter, you may be required to enter your

area code and other details. Enter the

information as required.

Enter a name in the "Name" field,

and click "OK".

If you are required to enter the

area code, enter it in the "Area

code" field. From the "Connect

using" drop-down menu, select

"TCP/IP (Winsock)", and click

"OK".

Enter the IP address of the pro-

jector in the "Host address" field

(see "TCP/IP" on the "Network"

menu of the projector), and en-

ter the data port of the projector

in the "Port number" field

("10002" is the factory default

setting), and click "OK".

, use other communications program referring to

does not come with HyperTerminal.

XP as the oper-

Select

"TCP/IP (Winsock)"

-39