Sharp PG-D100U Panduan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Sharp PG-D100U. Sharp PG-D100U 39 halaman.

Halaman Cetak
Example of a standard setup
90
The projector lens should be centered
in the middle of the screen.
Using the horizontal reverse function makes the following setups possible.
Example of a reversed image setup
By placing a mirror (normal flat type) in front of the lens and using the horizontal reverse function, the image
reflected from the mirror can be projected onto the screen.
Rear projection with a rear projection screen is also possible when using the horizontal reverse function.
90
The projector lens should be centered
in the middle of the screen.
Example of a ceiling-mount setup
Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to
obtain the manufacturer recommended ceiling mount bracket (sold separately). (AN-XGCM10 Ceiling Mount
Bracket, AN-EP101P Extension Tube).
If the relative positions of the projector and the screen are not properly adjusted, the picture will be distorted.
E-12
TOP VIEW
Lens center
AUDIENCE SIDE
Mirror
TOP VIEW
Lens center
90
If the projector and screen are not
centered properly, the picture will be
distorted, making viewing difficult.
Rear Projection
If the projector and screen are not
centered properly, the picture will be
distorted, making viewing difficult.
Upper edge of screen
(white portion)
SIDE VIEW
Lens center
SIDE VIEW
Lens center