Sharp PG-F317X - Notevision XGA DLP Projector Setup Manual - Halaman 10

Jelajahi secara online atau unduh pdf Setup Manual untuk Proyektor Sharp PG-F317X - Notevision XGA DLP Projector. Sharp PG-F317X - Notevision XGA DLP Projector 34 halaman. Xga conference/classroom data-video projectors
Juga untuk Sharp PG-F317X - Notevision XGA DLP Projector: Brosur & Spesifikasi (4 halaman)

Halaman Cetak

Setting up the Projector Network Environment

1. Connecting the Pro-

jector to a Computer

Establishing a one-to-one connection from the

projector to a computer. Using a commercially

available LAN cable (UTP cable, Category 5,

cross-over type) you can configure the pro-

jector via the computer.

Disconnect the computer's LAN

cable from the existing network.

Connect a commercially avail-

able LAN cable (UTP cable, Cat-

egory 5, cross-over type) to the

projector's LAN terminal and

connect the other end of the

cable to the computer's LAN

terminal.

Plug the power cord into the AC

socket of the projector.

Turn on the computer.

Info

Confirm that the LINK LED on the rear of the

projector illuminates. If the LINK LED does not

illuminate, check the following :

• The LAN cable is properly connected.

• The power switches of both the projector

and the computer are on.

This completes the connection. Now proceed to "2. Setting an IP Address for the

Computer".

-10

A LAN cable being

connected to the network

LAN cable

(cross-over type, commercially available)