Shimano Alfine S7000 Series Panduan Dealer - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano Alfine S7000 Series. Shimano Alfine S7000 Series 47 halaman.
Halaman Cetak
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
INSTALLATION
Installation of the hub to the frame
(A) (B)
3
Take up the slack in the chain and secure
the wheel to the frame with the cap
nuts.
When installing a part such as a
mudguard stay to the hub axle, install in
the order shown in the illustration.
(A)
(C) (D)
(E)
(B)
17
(A)
Non-turn washer
(B)
Cap nut
(C)
Carrier stay
(D)
Washer
(E)
Mudguard stay
Tightening torque
30 - 45 N·m
NOTE
When installing the hub to the frame, the
chain guard may come off, so check that the
chain guard is securely installed so that it will
not come off.
If it is not fully installed, noise may be
generated.
Chain guard