Shimano Alfine S7000 Series Panduan Dealer - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano Alfine S7000 Series. Shimano Alfine S7000 Series 47 halaman.

TO ENSURE SAFETY

For Installation to the Bicycle, and Maintenance:

• The cassette joint should only be used with sprockets from 16T to 23T.

• It is recommended that the chain ring of the front be set to the following gear ratio.

Sprocket

ratio

11-speed

1.8 - 2.0

8-speed

2.0 - 2.25

• In order to maintain proper performance, it is recommended that you contact the place of purchase or a bicycle dealer to carry out maintenance such

as internal oil replacement or lubrication after riding 1,000km from the start of use and then after about once every two years (or once about every

5,000km if the bicycle is used very frequently).

Also, it is recommended to use Shimano internal geared hub grease or a lubrication kit for the maintenance. If Shimano grease or a Shimano

lubrication kit is not used, problems such as a malfunction in gear shifting may occur.

• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.

• You should periodically wash the sprockets in a neutral detergent and then lubricate them again. In addition, cleaning the chain with neutral

detergent and lubricating it can be an effective way of extending the useful life of the sprockets and the chain.

Front

Model No.

Gear

38T

39T

FC-S5011

FC-C6000

42T

45T

FC-S501

42T

FC-S400

39T

SM-GEAR

Rear

FC-S5011

FC-S500