Shimano AM100HT Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Sepeda Shimano AM100HT. Shimano AM100HT 41 halaman.

Halaman Cetak

UM-6T80A-006

User's manual

Shifting Lever (2-WAY

RELEASE)

IMPORTANT NOTICE

• Contact the place of purchase or a distributor for information on

installation, adjustment, and replacement of the products which are not

found in the user's manual. A dealer's manual for professional and

experienced bicycle mechanics is available on our website (https://si.

shimano.com).

For safety, be sure to read this "user's manual"

thoroughly before use, follow it for correct use, and

store it so that it can be referenced at any time.

The following instructions must be observed at all times in order to

prevent personal injury and physical damage to equipment and

surroundings. The instructions are classified according to the degree of

danger or damage which may occur if the product is used incorrectly.

Failure to follow the instructions will result

DANGER

in death or serious injury.

Failure to follow the instructions could

WARNING

result in death or serious injury.

Failure to follow the instructions could

CAUTION

cause personal injury or physical damage

to equipment and surroundings.

Important Safety Information

WARNING

• Do not disassemble or modify the product. This may cause the product

to not operate correctly, and you may suddenly fall and be seriously

injured.

Notice

• Be sure to keep turning the crank during lever operation.

• Products are not guaranteed against natural wear and deterioration

from normal use and aging.

• For maximum performance we highly recommend SHIMANO lubricants

and maintenance products.

Regular Inspections Before Riding the Bicycle

Before riding the bicycle, check the following items. If any problems are

found, consult your place of purchase or a distributor.

• Is gear shifting carried out smoothly?

• Are the levers securely installed to the handlebar?

• Do any abnormal noises occur during operation?

• Is the lever pad free from abnormal wear, rattling, and other

abnormalities? (For models where a pad is attached to the lever.)

Names of parts

Front

Rear

Lever B

Lever A

MONO lever

Lever C

Crank

How to operate

Gear shifting operations

Be sure to keep turning the crank during lever operation.

Caution on operation

After shifting is completed, both levers A and B return to their initial

position.

Right hand lever operation

The number of sprocket shifts depends on the lever stroke. To shift one

sprocket, move the lever to position (1). To shift two sprockets, move the

lever to position (2).

• Lever A: Shifts from the smallest to largest sprocket side

(2)

(1)

Lever A

initial position

(1): Shifts one sprocket

Example: From the 3rd to 4th sprocket

(2): Quick-shifts two sprockets

Example: From the 3rd to 5th sprocket

• Lever B: Shifts from the largest to smallest sprocket side

(2)

(1)

Lever B

(2)

initial position

Gears can be shifted by pushing or pulling the lever.

Some models have two-step gear shifting.

Example: From the 4th to 3rd sprocket

Left hand lever operation

• Lever A: Shifts from the smallest to largest chainring side

Lever A

initial position

• Lever B: Shifts from the largest to smallest chainring side

Lever B

initial position

Gears can be shifted by pushing or pulling the lever.

Operation (MONO lever front side)

Operate one lever.

Gear shifting operations

Be sure to keep turning the crank during lever operation.

Monolever operation

• Lever C-1: Shifts from the smallest to largest chainring

Lever C

* After shifting, the lever is kept in position C-2.

• Lever C-2: Shifts from the largest to smallest chainring

Lever C

Gears can be shifted by pushing or pulling the lever.

* After shifting, the lever returns to position C-1.

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice. (English)