Shimano CLARIS ST-R2000 Panduan Dealer - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano CLARIS ST-R2000. Shimano CLARIS ST-R2000 48 halaman. Shifting lever
Halaman Cetak
INSTALLATION
Installation to the handlebar
INSTALLATION
Installation to the handlebar
• When installing components to a carbon frame (handlebars), there is a risk of causing damage to the frame (handlebars) or inadequate fixing
force, even at the recommended tightening torque. Verify the appropriate torque to apply with the bicycle or frame (handlebar) manufacturer.
• Install in a position where brake and gear shifting operations are not obstructed. Do not use in a combination which causes brake operation to be
obstructed.
(A)
NOTE
Use a handlebar grip with an outer
diameter of Ø36mm or less.
32
(A)
4mm hexagon wrench
Tightening torque
3 - 5 N·m