Shimano deore XT Instruksi Layanan Teknis - Halaman 7
Jelajahi secara online atau unduh pdf Instruksi Layanan Teknis untuk Aksesori Sepeda Shimano deore XT. Shimano deore XT 9 halaman. Front derailleur for triple
Juga untuk Shimano deore XT: Manual Petunjuk Servis (2 halaman)
Halaman Cetak
For international-standard mounts, attach adapters to calipers for post-type mounts.
(Separate front and rear adapters are available.)
1.
Loosen the caliper fixing bolts so that the caliper can move sideways, and then install the
adapter to the frame.
2.
Depress the brake lever so that the rotor is being clamped by the pads, and then tighten the
caliper fixing bolts.
G International standard mounting type
< Front >
Adapter fixing
bolts
20 mm
Rotor
< Rear >
Adapter fixing
bolts
20 mm
Tightening torque:
6 - 8 N·m {53 - 69 in. lbs.}
Install the accessory caps as shown in the illustration to prevent the bolts from loosening.
< Front >
Caps
For C-shaped guides and the
usual type of cable stoppers,
use the special Shimano
cable supporter (sold
separately) to secure as
shown in the illustration.
Operate the brake lever several times and check whether the brakes operate normally or
not. Also check that there are no oil leaks visible.
G Post mounting type
Provisionally install the caliper to the
frame (so that the caliper can move
Adapter
sideways), depress the brake lever so that
the rotor is being clamped by the pads,
and then tighten the caliper fixing bolts.
< Front >
Caliper
Caliper fixing
bolts
Caliper fixing
20 mm
bolts
24.5 mm
6 - 8 N·m {53 - 69 in. lbs.}
Caps
Post type
< C-shaped guide >
Tightening torque:
0.3 - 0.5 N·m {2.7 - 4.4 in. lbs.}
Tightening torque:
Caps
< Rear >
< Usual type of cable stopper >