Shimano E6000 Series Panduan Pengguna - Halaman 41

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Sepeda Shimano E6000 Series. Shimano E6000 Series 47 halaman. Total electric power system
Juga untuk Shimano E6000 Series: Panduan Pengguna (38 halaman)

Halaman Cetak

Situation where

Code

the error occurred

The speed sensor

may have been

E014

installed in the

wrong position.

A communication

error between the

E020

battery and drive

unit was detected.

A setting error was

E030

detected.

The chain tension

may not have been

adjusted or the

E031

crank may have

been installed in

the wrong position.

Part of the cycle

computer's

E043

firmware may be

damaged.

Troubleshooting

Assist function

Symptom

Assistance is not being

provided.

Operational restriction when

an error is being displayed

Power assistance is not

provided during riding.

Power assistance is not

provided during riding.

Power assistance is not

provided during riding.

The assist function is not

available. (Electronic gear

shifting does not function.)

Power assistance is not

provided during riding.

Cause / Possibility

Is the battery sufficiently charged?

Are you riding on long slopes in summer

weather or riding for a long time carrying a

heavy load?

The battery may be overheating.

The drive unit (DU-E6000 / DU-E6001 /

DU-E6050 / DU-E6010), cycle computer

(SC-E6000 / SC-E6010) or assist switch

(SW-E6000) may be connected incorrectly or

there may be a problem with one or more

of them.

Is the speed too high?

Contact the place of purchase or bicycle dealer.

Check that the cable between the drive unit and

battery is properly connected.

If the situation does not improve, contact the place

of purchase.

If the situation does not improve even after

pressing the battery power button and turning on

the power again, contact the place of purchase.

Contact the place of purchase or bicycle dealer.

Check the battery charge. If the battery is

nearly spent, recharge it.

Turn off the power, wait for a while and

then check once more.

Contact the place of purchase.

Check the Cycle Computer display.

Assistance is not provided at speeds of

25 km/h or more.

Remedy