Shimano FH-M3050 Panduan Dealer - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Aksesori Sepeda Shimano FH-M3050. Shimano FH-M3050 13 halaman. Front hub/freehub (disc brake)

Halaman Cetak

TO ENSURE SAFETY

• Be sure to follow the instructions provided in the manuals when installing the product.

Only use SHIMANO genuine parts. If a component or replacement part is incorrectly assembled or adjusted, it can lead to component failure and cause

the rider to lose control and crash.

•

Wear approved eye protection while performing maintenance tasks such as replacing components.

Be sure to also inform users of the following:

• Before riding the bicycle, check that the wheels are secured. If the wheels are loose in any way, they may come off the bicycle and cause serious

injury.

• If the quick release lever is on the same side as the disc brake rotor, confirm that it does not

interfere with the disc brake rotor. Otherwise, the bicycle may fall forward, and serious injury

may result.

If the quick release lever interferes with the disc brake rotor, stop use and contact the place of

purchase or a distributor.

• Make sure that the disc brake rotor has cooled down before operating the quick release lever. Failure to follow these instructions may result in burns

or injury.

• Make sure to properly install the quick release hub onto the bicycle. Otherwise the wheel may detach from the bicycle while riding, resulting in serious

injury.

• Make sure to read the manual for the quick release lever.

For installation to the bicycle, and maintenance:

• When installing the front wheel to the front suspension fork, always be sure to follow the directions given in the manual for the front suspension

fork. The securing method and tightening torque for the front wheel both vary depending on the type of front suspension fork being used. If the

instructions are not followed, the front wheel may fall out of the front fork and serious injury may occur. When the front wheel is tightened onto the

front suspension fork in accordance with the tightening torque in the manual, the front wheel's rotation may become stiff; however, the instructions

must always be followed.

Quick release type

• Use a front fork which is equipped with a wheel retention mechanism.

Be sure to also inform users of the following:

• This product is not warranted against damage resulting from improper use, such as jumping while riding or if the bicycle falls over, except if such

malfunctions are caused by manufacturing methods.

• Products are not guaranteed against natural wear and deterioration from normal use and aging.

• For maximum performance we highly recommend Shimano lubricants and maintenance products.

For Installation to the Bicycle, and Maintenance:

• If the wheel becomes stiff and difficult to turn, perform an inspection.

• Do not lubricate the internal parts of the hub. Otherwise, grease will flow out.

The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using

the product.

WARNING

NOTICE

Quick release lever

Disc brake rotor