Shimano ALFINE SG-S7001-11 Panduan Dealer - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Sepeda Shimano ALFINE SG-S7001-11. Shimano ALFINE SG-S7001-11 48 halaman.

Installation/removal

Installation of the hub to the frame

Place non-turn washers onto the right and left of the hub axle.

Turn the cassette joint so that the protrusions of the non-turn washers fit into the grooves in the rear

dropouts and align the joint to be installed almost parallel to the chainstay.

Non-turn washer (for left-side use)

Cassette joint

Chainstay

When installing parts such as a mudguard stay to the hub axle, install them in the order shown in

the figure.

Non-turn washer

When installing the hub to the frame, the chain guard may come off. Make sure that the chain

guard is securely installed. If not properly installed, noise may be generated.

Chain guard

Rear dropout groove

Non-turn washer

(for right-side use)

Mudguard stay

Carrier stay

Washer

Cap nut