Shimano SG-C6001-8 Panduan Dealer - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Sepeda Shimano SG-C6001-8. Shimano SG-C6001-8 48 halaman.

TO ENSURE SAFETY

Be sure to also inform users of the following:

The gears can be shifted while lightly pedaling, but on rare occasions the pawls and ratchet inside the hub

may produce some noise afterwards as part of normal gear shifting operation. In addition, a loud sound may

be temporarily emitted if the gears are shifted while strongly pedaling with E-BIKE, etc., but this is normal.

The internal geared hub is not completely waterproof. Avoid using the hub in places where water might get

inside and do not use high-pressure jets of water to clean the hub, otherwise the internal mechanism may

rust.

The following phenomena occur due to the internal gear-shifting structure and are not a failure of the

internal components.

Phenomenon

A sound is emitted when the pedal turns.

A sound is emitted when the bicycle is pushed

back.

There is a built-in mechanism for facilitating gear

shifting and when the mechanism operates during

gear shifting, noise and vibrations are generated.

Depending on the gear position, gear shifting

may give different feels.

Sound is emitted when pedal rotation is stopped

while riding.

Products are not guaranteed against natural wear and deterioration from normal use and aging.

For maximum performance we highly recommend SHIMANO lubricants and maintenance products.

Coaster brake type

If the wheels are not rotating smoothly, you need to replace or grease the brake shoes.

For installation to the bicycle and maintenance

The cassette joint should only be used with sprockets with 16T to 23T.

Hub type

For roller brake, disc

For coaster brake

brake, or V-BRAKE

Gear position

All speeds other than

1-speed

Internal 11-speed: 7 to

11-speed

Internal 8-speed: 5 to

8-speed

Internal 5-speed: All

speeds other than

1-speed

All speeds