Shimano PD-GR400 Panduan Dealer - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Dealer untuk Pedal Musik Shimano PD-GR400. Shimano PD-GR400 17 halaman.

Maintenance

Maintenance

Replacing the pins

If the pins become worn or damaged, replace them with new pins.

Replace pins as shown in the figure.

Adjustment is required if the rotating parts are not functioning properly. Follow the procedures

shown below.

Remove the cap using a tool such as a slotted screwdriver.

Use the TL-PD400 SHIMANO original tool to turn the cone to adjust the

bearing preload.

1 - 1.5 N·m

Cap