Crestron 4K DigitalMedia 8G+ DM-TX-4K-302-C Panduan Tambahan - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Pemancar Crestron 4K DigitalMedia 8G+ DM-TX-4K-302-C. Crestron 4K DigitalMedia 8G+ DM-TX-4K-302-C 20 halaman.
Halaman Cetak
LAN: 8-pin RJ-45 female;
Ì
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity
NOTE: Do not connect the LAN port to an Ethernet switch if the DM OUT port is
connected to a DigitalMedia™ switcher.
HDMI OUT: 19-pin Type A HDMI female;
Í
HDMI digital video/audio output (DVI compatible)
NOTE:
The HDMI OUT port requires an appropriate adapter or interface cable to
accommodate a DVI signal. The CBL-HD-DVI interface cable is available
separately.
HDMI OUT LED: Green LED, indicates HDMI signal presence at the HDMI output
Î
COM: 5-pin 3.5 mm detachable terminal block;
Ï
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR: 2-pin 3.5 mm detachable terminal block;
Ð
IR/serial port;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 V) up to 19200 baud
Ñ
SETUP: (Applicable only to a configuration in which a DigitalMedia switcher is not
used)
Red LED and recessed push button for Ethernet setup of the default static IP
address of the device
NOTE:
The default static IP address of the DM-TX-4K-302-C and the
DM-TX-4K-202-C is 192.168.1.205.
RESET: Recessed push button for reboot of the device
Ò
For pin assignment information, refer to the
Supplemental Guide — Doc. 7932B
Appendix: Pin Assignments (on
DM-TX-4K-202-C and DM-TX-4K-302-C • 5
page 13).