Digital Audio Labs LIVEMIX MIX-32 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengaduk Digital Audio Labs LIVEMIX MIX-32. Digital Audio Labs LIVEMIX MIX-32 15 halaman. Central mixer and power distributor
Juga untuk Digital Audio Labs LIVEMIX MIX-32: Panduan Pengguna (15 halaman)

Halaman Cetak

SETUP AND OPERATION

Although the MIX-16/32 is the central mixer of the Livemix

system, there are no direct controls. Setting up the

MIX-16/32 is simple and all configuration is done through an

attached CS-DUO personal mixer (covered in the CS-DUO

manual).

1. If using the analog input, connect the Livemix Data Out

port on the AD-24 to the Livemix Data In port on the

MIX-16/32. Please use shielded CAT5 or CAT6 cable to

make this connection. If using an option card, you will

not use the Livemix Data In port.

2. Connect each personal mixer to a Control Surface Port

on the front of the MIX-16/32. These do not have to be

in any particular order or sequential. Planning which

CS-DUO goes into which Control Surface Port may help

identify each personal mixer when using the MirrorMix

remote mixing feature.

3. Connect the power supply on the back of the MIX-16/32

to an appropriate power source.

4. Turn on the MIX-16/32.

USING THE USB OUTPUT

The MIX-16/32 is equipped with a USB port for connection

to a computer. When connected, the MIX-16/32 will show

up on the computer as a USB audio class device. When

used with recording software, the stereo output of any

single CS-DUO can be recorded.

All configuration for this feature is performed on an

attached CS-DUO personal mixer.

• Select a CS-DUO mix to assign to the USB Port and

select the Mix Tools menu on that mix

• Press Global Setup

• Press the MIX-16/32 USB Mix Assign button

• You will see a message that says "Send your mix to the

MIX-16/32 USB record port?" Press "Yes" to assign or

"No" to cancel

The selected stereo mix will be sent to the USB port of the

MIX-16/32. Connect to a Windows PC or Apple computer

and record the stereo signal with recording software.

LIVEMIX MIX-16/32

NOTE:

The audio data sent over the

Livemix system is a proprietary

data format. It will not work with

a switch or a standard Ethernet

network. When using an Option

Card designed for networked

audio use, such as the LM-DANTE-

EXP, consult the Option Card

manual for information on how to

connect to the network.

NOTE:

There are a variety of options when

it comes to network cables. For the

purposes of Livemix, either CAT5e

or CAT6 cabling is appropriate.