Crestron 4 Series Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Kontrol Crestron 4 Series. Crestron 4 Series 12 halaman. Control processor for zūm lighting control system
Juga untuk Crestron 4 Series: Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (6 halaman), Mulai Cepat (5 halaman), Panduan Memulai Cepat (6 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman)

ZUM-HUB4

4-Series™ Control Processor for Zūm® Lighting Control System

Zūm Wired System Diagram

NOTES:

Daisy-chain up to 20 Zūm Net devices (up to 328 ft (100 m)

between Zūm Net devices) with purple CBL-CAT5E-ZUMNET-P

RJ-45 cables (sold separately).

Do not exceed three network switches between a ZUM-HUB4

and a Zūm Net device.

System sensors communicate digitally via Zūm Link. Non-system

sensors communicate via an analog connection on a Zūm Wired

load controller.

Firmware Upgrade

Before using a Zūm Wired device, ensure it is updated with the latest

firmware. Check for the latest firmware at

www.crestron.com/firmware. Load the firmware onto the device using

Crestron Toolbox™ software, the ZUM-HUB4 web interface, or the Zūm

app (refer to

Update Firmware for a Zūm

Quick Start

Space).